Epoxy and Polyaspartic Coating

We grind, polish, repair, and resurface residential and commercial garage floors. We offer staining, engraving, and sealing as well as Epoxy or Polyurea Vinyl Chip systems for resurfacing the garage floors.We only utilize professional premium epoxy or polyurea sealers and Aspartic and/or Aliphatic urethanes sealers for tough durable, chemical resistant finishes. 

100% Solids Epoxy

These systems are often reserved for professional installers. A 100% solids epoxy generally requires adequate surface preparation in the form of an acid etching , grinding, or shot blasting . These systems are squeegeed and back-rolled often in two coats. they will create a thick layer of protection and are chemically inert to many household products. They will last for many years and are installed at at average cost of $1.50 - $3.00 ft

Epoxy, Polyurea and Polyaspartic Color Flake System

These are the industry standard when it comes to professional garage floor coating systems. A Color Flake System is similar in its installation regardless of the specific product used. Surface preparation is of paramount importance for any long lasting system. A first color coat is applied, then a second coat is sometimes required. While the second coat is still wet, color flake chips are broadcast onto the surface until rejection (the floor is 100% covered). Once this layer dries, a top coat is then installed (sometimes a second) to seal off the surface and lock in the chips.These systems vary in price but can range from $3.50ft - to $5.50 ft